A clogged showerhead is perhaps the most annoying thing one can encounter while taking a shower. Luckily, changing a showerhead is an easy process that you can do yourself. If you want to know how to replace a showerhead, here are 5 simple steps you can follow to install a brand-new shower head and enjoy its benefits. Also, If you want to know about how to disassemble the showerhead, you must read this detailed guide.
Required Tools and Material
Before actually starting the work, you should make sure you have all your tools and material with you. Your work will be cut down in half when all the right equipment is available. The 5 things you need are:
- Rag or Hand Towel
- Slipjoint Pliers
- Adjustable Wrench
- Teflon Tape
- Shower Head (new)
Now we get to work!
How to Change a Shower Head?
STEP 1 – Remove the Old Shower Head
Grab the hand towel and wrap it around the base of the shower arm. This will give you a firm grip on the shower arm and the wall behind it will not be damaged. Then, take the adjustable wrench and use it on the base of the showerhead. You can also use the Slipjoint pliers for a better grip on the showerhead. Turn the showerhead counterclockwise. It will unscrew from the arm and your old showerhead will be freed.
STEP 2 – Clean the Shower Arm Thoroughly
Now take the rag and use it to clean the rust, scale, and other debris from inside and outside the shower arm. This is your chance to ensure that no residue is left behind so that the new shower head provides you with the full pressure of water.
STEP 3 – Tape the Shower Arm Threads
Next, use the Teflon tape to wrap the threads of the shower arm. Make sure you do this in a clockwise direction tightly so that your shower arm gets fixed properly. Press the tape into the grooves and create a secure seal.
STEP 4 – Place the New Showerhead
Whether you have a fixed, mounted, or hand-held shower arm, you can use the same technique to screw the new showerhead on it. Just place the showerhead on the taped arm and twist it so it can close properly. You might need to use a towel and adjustable wrench to tighten the showerhead properly.
STEP 5 – Turn on The Water and Test the New Showerhead
The last and most important step for how to change a shower head is to check if everything is working fine. There should be no leaks or drips. The water pressure must also be fine. If anything is out of place, you should take off the showerhead and use additional tape to fix the issue. You are all set to use your new showerhead now!
Infographic Content- Fix Your Shower Head like a Pro!
Youtube How To Replace A Shower Head
How Much Does It Cost To Replace A Shower Head?
Replacing a showerhead by yourself will give you only the basic cost of the new shower head. If you follow the steps mentioned above, you can easily install your new shower head without asking for professional help.
There are a variety of showerheads available in the market but you must buy the best from them. The ECO Water Shower Head is the latest and most well-known product that will take away all your shower head worries.
You May Also Like To Know
While replacing a showerhead might seem like a tedious task, you can do it in just 10 minutes if you follow all the mentioned steps. For more information, check:
How To Replace A Handheld Shower Head
The process of replacing a handheld showerhead is very much similar to the process of changing a shower head that is fixed on a wall. All you need to do is make sure you place the hose somewhere safe while cleaning the showerhead.
How To Replace A Broken Shower Head Fixture
A broken shower head fixture should be replaced immediately before it stops the water flow altogether. If there is a small leakage, you can just use tape to fix it but if the damage cannot be reversed like this, get a new shower head and follow steps 1-5 to fix the issue.
All your worries on how to change out a showerhead should vanish now that you are well prepared and well equipped to carry out the task. Don’t wait anymore and buy the new shower head you have always wanted!